{"title":"M3 M4 G8x","description":null,"products":[{"product_id":"airtec-motorsport-carbon-fibre-direct-dual-route-intake-kit-for-bmw-g8x-m-models","title":"AIRTEC Motorsport Carbon Fibre Direct Dual Route Intake Kit for BMW G8x M Models","description":"\u003cp\u003eAs part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our Direct Dual Route induction kit upgrade aimed at modified G-Series M car owners who want to improve the performance of their car with a simple, bolt-on modification for track or fast road use.\u003c\/p\u003e\n\u003cp\u003eBy stripping back the car’s induction system to the essentials and using a single, huge AIRTEC Motorsport Group A cotton air filter, we’ve created a kit with the shortest possible route from the filter to the turbos. The benefits of this open design that feeds both turbos with significantly reduced pipework is far less restriction, which increases power, performance and sound, thanks to a much louder induction note even in comparison to other induction kits.\u003c\/p\u003e\n\u003cp\u003eThe kit has been designed to use original rubber mounts and also retains the original front air feed to provide a constant flow of fresh, cold air towards the filter, which is protected from warm air within the engine bay by a laser-cut heatshield.\u003c\/p\u003e\n\u003cp\u003eMade from high-quality carbon fibre for increased strength, appearance and sound, the kit is also lightweight and comes with Pro Hoses silicone connectors, all fixtures and fittings as well as detailed installation instructions.\u003c\/p\u003e\n\u003cp\u003eIts improved air flow, performance, sound and visual gains, as well as its straight-forward fitment make it an essential modification for all modified G-Series M car models.\u003c\/p\u003e\n\u003cp\u003eTESTED\u003cbr\u003eDyno tested on a Dyno Dynamics rolling road at WG Motorworks using our own BMW M2 G87 fitted with downpipes, mid-pipes, our AIRTEC Motorsport turbo inlets and a custom tune.\u003c\/p\u003e\n\u003cp\u003eThis saw a 6.9bhp gain from a back-to-back test against a our other AIRTEC Motorsport induction kit.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003eDyno proven power and torque increases\u003cbr\u003eImproved air flow for power and performance increases\u003cbr\u003eMassive improvement in induction noise over other kits\u003cbr\u003eHuge Group A cotton air filter allows more flow\u003cbr\u003eLaser-cut heatshield protects from warm air\u003cbr\u003eCarbon fibre construction for strength, appearance and sound\u003cbr\u003eHigh-quality powder-coated black finish\u003cbr\u003ePro Hoses silicone connector included\u003cbr\u003eComes with all fixtures and fittings\u003cbr\u003eFeatures detailed fitting guide\u003cbr\u003eRegistered Design Right number: Application Pending \u003c\/p\u003e\n\u003cp\u003eAIRTEC part number: ATIKBMW9\u003c\/p\u003e","brand":"Airtec Motorsport","offers":[{"title":"Default Title","offer_id":55244530516305,"sku":"ATIKBMW9","price":550.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/ATIKBMW9_4.webp?v=1791581370"},{"product_id":"active-autowerke-aa-bmw-m3-m4-g8x-equal-length-mid-pipe-exhaust-gen-2","title":"Active Autowerke AA BMW M3 M4 G8x Equal Length Mid-Pipe Exhaust GEN 2","description":"\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cp\u003e**This product is a part of the Active Autowerke Motorsport Collection. It is for RACE and OFF-ROAD USE ONLY!\u003c\/p\u003e\n\u003cp\u003eActive Autowerke is proud to release our patented Signature Equal Length Mid-Pipe for the BMW G80 M3 and G82 M4. This brings our expertise with developing the first equal length mid-pipe from the F8X M cars to the G8X M cars and is an alternative to our X-Pipe and Single Mid-pipe for the G8X. It provides the advantages of an equal length exhaust system with a smoother high rev sound. BMW provided an equal length solution with the crossover pipe from the short downpipe. However, they overcompensated and made the length of the drivers side exhaust longer than the passenger side – this equal length midpipe corrects the passenger side exhaust length giving the G80\/G82 a true equal length and smoother sound. Our equal length technology has been recognized as unique with our US Patent 11248511 and patent pending in UK and EU.\u003c\/p\u003e\n\u003cp\u003eWhile these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G80\/G82 which comprises a choice of three mid-pipes (this one, the single or our x-pipe), a rear axle-back valved exhaust and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G80\/G82 with an amazing sound. You will feel like you are driving a true M-car again.\u003c\/p\u003e\n\u003cp\u003eThis exhaust system upgrade was designed and engineered to work with most after-market exhaust systems\/mufflers on the market today with only two cuts needed in the stock mid-pipe. It is a bolt-on that can be performed by most and the stock mid-pipe can also be reinstated if needed.\u003c\/p\u003e\n\u003cp\u003eThis system provides the maximum flow available and restores the sports car growl expected from a BMW M-Series car.\u003c\/p\u003e\n\u003cp\u003eThe Active Autowerke equal length mid-pipe system is constructed of 100% 304 brushed stainless steel and has a industry standard warranty against rust.\u003c\/p\u003e\n\u003cp\u003eThis latest addition to the Signature line up is a must for the true Enthusiast looking for an alternative to the stock S58 sound of the G8X platform to match the amazing performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003cbr\u003eDurable 100% 304 Stainless Steel\u003cbr\u003ePatented Active equal length technology provides smooth high rev sound\u003cbr\u003eOnly two cuts needed with Factory Style Flanges and clamps\u003cbr\u003eInstall to all systems that use factory style fitting\u003cbr\u003eOne year warranty\u003cbr\u003eReplaces stock mid-pipe for better sound and flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003cbr\u003eG80\/G82 M3\/M4\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Active Autowerke","offers":[{"title":"Non Resonated (Quieter)","offer_id":55268149559633,"sku":"AAW-MPS-S58-017-STRAIGHT","price":2016.0,"currency_code":"GBP","in_stock":true},{"title":"Resonated (Louder)","offer_id":55268149592401,"sku":"AAW-MPS-S58-017-RESONATED","price":2220.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/g80_el_gen_2_a_f513f42f-df04-4ea9-8e84-1c1eb32c86de.webp?v=1791804360"},{"product_id":"active-autowerke-aa-bmw-m3-m4-g8x-single-mid-pipe-exhaust","title":"Active Autowerke AA BMW M3 M4 G8x Single Mid-Pipe Exhaust","description":"\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003e\n\u003cdiv class=\"woocommerce-Tabs-panel woocommerce-Tabs-panel--description panel entry-content wc-tab\" id=\"tab-description\" role=\"tabpanel\"\u003e\n\u003cp\u003e**This product is a part of the Active Autowerke Motorsport Collection. It is for RACE and OFF-ROAD USE ONLY!\u003c\/p\u003e\n\u003cp\u003eActive Autowerke is proud to release the much requested Signature Single Mid-Pipe for the BMW G80 M3 and G82 M4. This brings our expertise with a single mid-pipe from the F8X M cars to the G8X M cars and is an alternative to our X-Pipe Mid-pipe for the G8X.It provides a slightly deeper tone to the exhaust at a similar price point but without the option of secondary cats.\u003c\/p\u003e\n\u003cp\u003eWhile these cars have received rave reviews for their performance, the sound is a muffled one leaving the driver to wonder if they are really driving a BMW M-car. In order to solve this, Active Autowerke has created a full exhaust system for the G80\/G82 which comprises a choice of two mid-pipes (this one the single or our x-pipe), a rear axle-back valved exhaust and a set of GESI catted downpipes. Together, this remake of the stock exhaust results in a G80\/G82 with an amazing sound. You will feel like you are driving a true M-car again.\u003c\/p\u003e\n\u003cp\u003eThis exhaust system upgrade was designed and engineered to work with most after-market exhaust systems\/mufflers on the market today with only a single cut needed in the stock mid-pipe. It is a bolt-on that can be performed by most and the stock mid-pipe can also be reinstated if needed.\u003c\/p\u003e\n\u003cp\u003eThis system provides the maximum flow available and restores the sports car growl expected from a BMW M-Series car. We are testing a resonator optional upgrade for those who prefer a smoother sound to their exhaust systems.\u003c\/p\u003e\n\u003cp\u003eActive Autowerke is able to improve on the factory mid-pipe by mixing the sounds earlier and for a longer period creating a deeper tone to the exhaust sound.\u003c\/p\u003e\n\u003cp\u003eThe Active Autowerke single mid-pipe system is constructed of 100% 304 brushed stainless steel and has a industry standard warranty against rust.\u003c\/p\u003e\n\u003cp\u003eThis latest addition to the Signature line up is a must for the true Enthusiast looking for a better sounding car to match amazing performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEY FEATURES\u003c\/strong\u003e\u003cbr\u003eDurable 100% 304 Stainless Steel\u003cbr\u003eOnly single cut needed with Factory Style Flanges and clamps\u003cbr\u003eInstall to all systems that use factory style fitting\u003cbr\u003eOne year warranty\u003cbr\u003eReplaces stock mid-pipe for better sound and flow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATIONS\u003c\/strong\u003e\u003cbr\u003eBMW G80\/G82 M3\/M4\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003csection class=\"related products\"\u003e\u003c\/section\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Active Autowerke","offers":[{"title":"Non Resonated (Quieter)","offer_id":55268186161489,"sku":"AAW-MPS-S58-001-STRAIGHT","price":1380.0,"currency_code":"GBP","in_stock":true},{"title":"Resonated (Louder)","offer_id":55268186194257,"sku":"AAW-MPS-S58-001-RESONATED","price":1593.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/g80-single1.webp?v=1791804421"},{"product_id":"autowatch-ghost-ii-canbus-immobiliser","title":"Autowatch Ghost-II CANbus Immobiliser","description":"","brand":"WG Motorworks","offers":[{"title":"Default Title","offer_id":55268280533329,"sku":"GHOST","price":499.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/Ghost.webp?v=1791801603"},{"product_id":"wgm-bmw-condition-based-service-cbs-brake-fluid-change","title":"WGM BMW Condition Based Service (CBS) Brake Fluid Change","description":"\u003cp\u003eAs part of the CBS service schedule, Which is every 2 years, we can add this to your CBS service schedule to save additional visits.\u003c\/p\u003e\n\u003cp\u003eWe can offer Performance Brake fluid, please request when dropping your car off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis service includes the following:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW Key data read, via Genuine BMW Key Reader\u003cbr\u003eOnline Servers updated, via AOS Portal (Same as BMW Dealers)\u003cbr\u003eBrake Fluid changed\u003cbr\u003eService Schedule reset on iDrive\u003cbr\u003eiDrive updated\u003c\/p\u003e","brand":"WG Motorworks","offers":[{"title":"Standard Dot 4","offer_id":55275947295057,"sku":"WGM-BMW-SERVICE-5","price":99.0,"currency_code":"GBP","in_stock":true},{"title":"Performance","offer_id":55275947327825,"sku":"WGM-BMW-SERVICE-5","price":140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/WGMCBS.jpg?v=1791839695"},{"product_id":"wgm-vehicle-health-check","title":"WGM Vehicle Health Check","description":"\u003cp\u003eThis service is for those who want an in-depth check of their vehicle \u003cbr\u003e \u003cbr\u003eAdvice is given based on what’s found, and prices can be quoted afterwards.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eThis Normal VHC (Service Check) in-house only service check includes:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003eLights and Levels\u003cbr\u003eHorn \/ Wipers \/ Washers\u003cbr\u003eTyre Condition \/ Pressure\u003cbr\u003eBrakes \/ Brake lines (Wheels on)\u003cbr\u003eSuspension \/ Bushes \u003cbr\u003eExhaust System \/ Catalyst\u003cbr\u003eEngine \/ Gearbox\u003cbr\u003eAntifreeze Concentration\u003cbr\u003eBrake Fluid Hygroscopic Level\u003cbr\u003eAll common known issues checked\u003cbr\u003eAdvance Health check adds the following;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull Vehicle \/ Engine Management Code check (Not a Diagnosis)\u003c\/strong\u003e\u003cbr\u003eAny fault codes stored, documented\u003cbr\u003eRoad Test\u003cbr\u003eBMW \/ Mini – Online history check \/ Run through\u003cbr\u003e\u003c\/p\u003e","brand":"WG Motorworks","offers":[{"title":"Normal","offer_id":55276245320017,"sku":null,"price":120.0,"currency_code":"GBP","in_stock":true},{"title":"Advanced","offer_id":55276245352785,"sku":null,"price":200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/WGMServicePlaceholder.jpg?v=1791836011"},{"product_id":"wgm-dyno-rolling-road-health-check-data-logging-map-testing","title":"WGM Dyno Rolling Road Health Check \/ Data Logging \/ Map Testing","description":"\u003cp\u003eThis service is for those interested to know how much power and torque their vehicle is making, or to ensure their car is running as intended. \u003cbr\u003e \u003cbr\u003eAdvice is given based on results, however, this is not a diagnosis service \u003cbr\u003e \u003cbr\u003eOur rolling road is a Dyno Dynamics Dynotech 2wd dyno, which can read up to 1200HP\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eThis basic in-house only service includes:\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003eRolling road (dyno) session \u003cbr\u003eBefore and after printouts\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Data Logging Dyno Health check includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoost check (if applicable) \u003cbr\u003eAFR checked\u003cbr\u003eData logging\u003cbr\u003eProviding more detailed insight into the running\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOptional Map switching Dyno Health check includes all of the above plus:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe customer’s option to test different maps (up to 3 total)  switching using their device with retesting\u003c\/p\u003e\n\u003cp\u003eThis could be WMI on\/off maps or different levels of power that require reflashing the ECU\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"WG Motorworks","offers":[{"title":"2WD Basic","offer_id":55276250300753,"sku":null,"price":120.0,"currency_code":"GBP","in_stock":true},{"title":"2WD Data Logging","offer_id":55276250333521,"sku":null,"price":140.0,"currency_code":"GBP","in_stock":true},{"title":"2WD Map Switching","offer_id":55276308431185,"sku":null,"price":180.0,"currency_code":"GBP","in_stock":true},{"title":"4WD Basic","offer_id":55276308463953,"sku":null,"price":150.0,"currency_code":"GBP","in_stock":true},{"title":"4WD Data Logging","offer_id":55276308496721,"sku":null,"price":170.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/WGMServicePlaceholder.jpg?v=1791836011"},{"product_id":"powerflex-rear-diff-mount-bush-for-bmw-m2-m3-m4-f8x-g8x","title":"Powerflex Rear Diff Mount Bush for BMW M2 M3 M4 F8x G8x","description":"\u003cp\u003ePFR5-4026 is a replacement bush that features a built-in support washer, providing further stability of the diff under acceleration. PFR5-4026 can also be used in conjunction with our PFR5-4030 dual-mount rear differential bracket to mount two bushes into the factory positions. Made using our signature Purple 80A durometer polyurethane and Black anodised 2011-T6 aluminium, to reduce drivetrain deflection and the potential for wheel-hop during hard launches.\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33177852495\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33316899168\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":55277333479761,"sku":"PFR5-4026","price":90.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/get_fb36f374-d1ff-47e0-b121-4fe0d5fdcd7b.png?v=1791842286"},{"product_id":"powerflex-black-series-rear-diff-mount-bush-for-bmw-m2-m3-m4-f8x-g8x","title":"Powerflex Black Series Rear Diff Mount Bush for BMW M2 M3 M4 F8x G8x","description":"\u003cp\u003ePFR5-4026 is a replacement bush that features a built-in support washer, providing further stability of the diff under acceleration. PFR5-4026 can also be used in conjunction with our PFR5-4030 dual-mount rear differential bracket to mount two bushes into the factory positions. Made using our signature Black 95A durometer polyurethane and Black anodised 2011-T6 aluminium, to reduce drivetrain deflection and the potential for wheel-hop during hard launches.\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33177852495\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33316899168\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":55277364150609,"sku":"PFR5-4026BLK","price":99.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/get_bef8b970-2f3a-4ba9-bb72-d13ac09a3b4a.png?v=1791842694"},{"product_id":"powerflex-rear-diff-front-mounting-bush-kit-for-bmw-m2-m3-m4-g8x","title":"Powerflex Rear Diff Front Mounting Bush Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003ePFR5-4024 Rear Diff Front Mounting Bush is a new part number full bush replacement, reconfigured from existing CNC Aluminium componentry and polyurethane bushes. Made combining our signature Purple 80A durometer polyurethane and Black anodised 2011-T6 aluminium, to reduce drivetrain deflection and the potential for wheel-hop during hard launches.\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33118090205\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":55277370671441,"sku":"PFR5-4024","price":268.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/get_66ec2b34-525d-476f-8662-bfffb55bfb11.png?v=1791842794"},{"product_id":"powerflex-black-series-rear-diff-front-mounting-bush-kit-for-bmw-m2-m3-m4-g8x","title":"Powerflex Black Series Rear Diff Front Mounting Bush Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003ePFR5-4024 Rear Diff Front Mounting Bush is a new part number full bush replacement, reconfigured from existing CNC Aluminium componentry and polyurethane bushes. Made combining our signature Black 95A durometer polyurethane and Black anodised 2011-T6 aluminium, to reduce drivetrain deflection and the potential for wheel-hop during hard launches.\u003c\/p\u003e\n\u003cp\u003eOEM Part Number: 33118090205\u003c\/p\u003e","brand":"Powerflex","offers":[{"title":"Default Title","offer_id":55277375062353,"sku":"PFR5-4024BLK","price":294.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/get_5830297d-3ccc-4461-924c-f2d5856c055b.png?v=1791842831"},{"product_id":"bmw-rear-subframe-bolt-for-bmw-m2-m3-m4-f8x-g8x","title":"BMW Rear Subframe Bolt for BMW M2 M3 M4 F8x G8x","description":"\u003cp\u003eOE\u003cbr\u003e07 14 9 503 940\u003cbr\u003e07149503940\u003cbr\u003e33 30 2 284 642\u003cbr\u003e33302284642\u003c\/p\u003e\n\u003cp\u003ePrice is for 1x\u003c\/p\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":55289421136209,"sku":"07149503940","price":11.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/07149503940.webp?v=1791903145"},{"product_id":"bmw-m-performance-height-adjustable-spring-kit-for-bmw-m2-m3-m4-g8x","title":"BMW M Performance Height Adjustable Spring Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003eThe M Performance Height Adjustable Spring and Sleeve kit for the G8X M3 and M4 allows a large range of height adjustment while retaining the factory electronic damping control. The factory spring perches are removed from the front dampers and BMW’s own threaded height-adjustable perches are installed. The kit includes height adjustable spring perches for the front and rear, strengthened and shortened bump stops and shock sleeves to protect the OE BMW dampers.\u003c\/p\u003e\n\u003cp\u003e31-30-5-A2D-979\u003c\/p\u003e","brand":"BMW","offers":[{"title":"Default Title","offer_id":55289526780241,"sku":"31305A2D979","price":1575.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/GenuineBMWG80G82MPerformanceHeightAdjustableSpringKit_M3_M3Competition_M4_M4Competition_-1.webp?v=1791903811"},{"product_id":"do88-auxiliary-radiator-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Auxiliary Radiator for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003e\u003cstrong\u003eTo fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eUpgrade the performance of your 2021+ BMW G8X M2\/M3\/M4 engine with the do88 Performance Auxiliary radiators!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe S58 Engine Cooling System\u003c\/strong\u003e\u003cbr\u003eThe S58 engine features a cooling system with three frontal radiators, one large central radiator and two smaller auxiliary radiators located in front of each wheel. Tuned engines produce significantly more heat, making it challenging to maintain optimal engine temperatures during intense street, track, or drag strip driving. The OE auxiliary radiators have slim cores and plastic tanks, which are not ideal for tuned cars. Upgrading these auxiliary radiators is will help to ensure proper engine temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solution\u003c\/strong\u003e\u003cbr\u003eFortunately, the design space available for the auxiliary radiators allows for both increased frontal surface area and core thickness on both sides of the car. The OE radiator is identical for both sides, and our do88 Performance Radiators are designed to be drop-in replacements for both left and right sides. We offer them as a pair because upgrading just one radiator isn't as effective as upgrading both simultaneously. Our Performance Auxiliary Radiators provide enhanced cooling capacity to prevent heat soaking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe installation is simple, as our radiators come with CNC-machined mounting brackets and OE-style “Quick Connect” inlet\/outlet connections. The OE rock guard can be easily attached to our radiators for protection against small rocks and road debris.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLarger core volume than the original equipment (OE), 43% larger.\u003cbr\u003e2-row core that is 48mm thick, this provides an increased active cooling area by a whole 13%.\u003cbr\u003eFull aluminium construction, complete with durable TIG-welded end tanks.\u003cbr\u003eIncreased fluid capacity (X,X litre more) for optimal heat dissipation.\u003cbr\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 17118095285\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: WC440, WC-440\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304459485521,"sku":"DO88WC-440","price":485.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/WC-440_1-600x400.jpg?v=1791988851"},{"product_id":"do88-charge-cooler-manifold-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Charge Cooler Manifold for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003eTo fit:\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eEnhance your S58 engine’s performance with the do88 Charge Cooler Manifold!\u003c\/p\u003e\n\u003cp\u003eBackground\u003cbr\u003eThe S58 engine, introduced with the G80\/82 M3\/M4 2021+, has proven to be a real gem of an engine, capable of high outputs with great character. However, there are a few week points that needs addressing, both for performance and reliability. The S58 comes equipped with a water-to-air charge cooler that is coupled a with front-positioned heat exchanger (water radiator). The heat exchanger serves to cool the water circulating through the charge air cooler, which in turn helps dissipate heat from the charge air before it enters the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChallenges with the factory components\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe charge air cooler is integrated into the intake manifold on the S58, making it an intricate and dense construction, demanding accuracy in the design and execution by us as an aftermarket producer. This design that merges the intercooler with the intake manifold is effective; however, its performance is compromised by the tube-and-fin core that is attached to the thermoplastic tanks through crimping. These crimped connections have emerged as a significant vulnerability, with numerous instances of failure occurring with boost just a bit beyond the factory level.\u003c\/p\u003e\n\u003cp\u003eOwners of tuned S58 engines often confront the issue of rapid heat soak in the charge air cooling system, particularly when the vehicle is used for track days. Elevated intake air temperatures may prompt the ECU to decrease the power output, or even switch the car into limp-home mode.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the factory installed direct injection system, with its obvious benefits, is not well suited for insane horsepower applications or ethanol flex fuel usage. To be able to inject more fuel, many turn to modifying the stock intake by drilling holes for port fuel injectors.\u003c\/p\u003e\n\u003cp\u003eAs is often the case, factory components can become limiting factors when you strive for high power levels, particularly in terms of airflow. The factory (OE) intake manifold is such a component, that not only restricts airflow but also poses a significant risk of cracking under high boost levels, due to its plastic construction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe do88 solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBar\u0026amp;Plate core\u003c\/strong\u003e\u003cbr\u003eOur manifold features a Bar\u0026amp;Plate design air-water core, which incorporates densely stacked cooling fins, offering great heat transfer. The core is precisely 127 mm (5 inches) thick, maximising its effectiveness for this specific application. Our core is remarkably 62 percent larger than stock! Both the air and water fins´ characteristics have undergone careful evaluation to achieve the ideal balance between optimal cooling and airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInnovatively designed cast end tanks\u003c\/strong\u003e\u003cbr\u003eThe charge air and cooling water are evenly distributed across the core through carefully designed, cast end tanks. The development of these end tanks involved a comprehensive process, including 3D-scanning, multiple design iterations followed by Computational Fluid Dynamics (CFD) analysis and 3D-printing, before arriving at the finalised prototype. We opted for cast end tanks over CNC-machining. Casting allows complex shapes that better serves the desired function. To us, maximum performance supersedes the bling factor!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersatile Manifold Design: From Fuel Injection to Power Modifications\u003c\/strong\u003e\u003cbr\u003eOur manifold outlet tank is pre-configured to accommodate auxiliary port fuel injection. A custom-made fuel rail with female AN-8 threads is included, this easily installs to the outlet tank. We designed it for compatibility with Injector Dynamics ID1050x-34-14 or Bosch EV14 (short) fuel injectors. If you opt to not use port fuel injection, we provide injector blanking plugs for your convenience. Additionally, each cylinder runner on the outlet tank is equipped with a 1\/8” NPT port, suitable for nitrous or methanol injection – a commonly used power modification for the S58 engine (sealing plugs are included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra Measurement \u0026amp; Vacuum Ports\u003c\/strong\u003e\u003cbr\u003eIntegrated into the side of the manifold outlet tank, do88 has incorporated a 3-port pad directly into the casting. This feature offers the flexibility to measure additional parameters or serve as an extra vacuum source. Should you choose not to utilise these three 1\/8” NPT ports, sealing plugs are provided in the included hardware kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Thermal Management\u003c\/strong\u003e\u003cbr\u003eIncluded with the intake manifold is a special thermal barrier spacer, engineered to insulate the aluminium intake manifold from conductive heat transfer from the cylinder head. This barrier effectively lowers intake air temperatures (IAT´s), enhances the efficiency of the charge air cooler, and helps minimise the issue of heat soak. Unlike the OE plastic intake manifold, the do88 manifold is made from aluminium, capable of withstanding higher boost pressures. The thermal barrier spacer reduces the conductive heat transfer, otherwise typical to aluminium components. The spacer features a robust seal, achieved through custom-made, high-specification FKM-silicone O-rings. These O-rings are installed in precision-machined grooves for a secure fit. This approach offers a significantly better seal compared to other competitors´ methods, which often rely on less reliable sealing agents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Details:\u003cbr\u003e\u003c\/strong\u003eUtilises a high performance, Bar\u0026amp;Plate, air-to-water intercooler core, 127 mm (5”) thick.\u003cbr\u003eMaintains low air intake temperatures and shows improvement over the OE charge cooler manifold. 28,5°C compared to OEM 33°C. Exact figures to be found in the diagrams under the product pictures.\u003cbr\u003eMore air to your engine, less backpressure and better airflow! Airflow at 0,05 bar \/ 0,73 psi pressure drop: 511 CFM (422 CFM), 21% higher! See diagram under the product pictures.\u003cbr\u003eDesigned in SolidWorks using Computational Fluid Dynamics (CFD).\u003cbr\u003eEasy access to spin-off oil filter for quick oil changes – no need to remove the manifold every oil change.\u003cbr\u003eIntegrated sensor pad with three 1\/8″ NPT ports to measure additional parameters (sealing plugs are included).\u003cbr\u003eFuel rail is included for auxiliary top feed port injection.\u003cbr\u003eFuel injector plugs for each cylinder runner is included.\u003cbr\u003eIndividual 1\/8″ NPT ports on the top of each cylinder runner for nitrous or meth injection (sealing plugs are included).\u003cbr\u003ePlug-and-play design, see installation instruction.\u003cbr\u003eIncluded are all the essential brackets needed for various components, such as wire harnesses.\u003cbr\u003eThermal barrier spacer included, engineered to insulate the aluminium intake manifold from conductive heat transfer from the cylinder head.\u003cbr\u003eCustom made high spec FKM-silicone O-rings included for both the thermal barrier spacer and intake manifold (12 pcs in total).\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 17518092584\u003cbr\u003eDO88 Ref: ICM450, ICM-450, ICM-450-K\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304484585809,"sku":"DO88ICM-450-K","price":2551.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/icm-450-k_1-600x400.jpg?v=1791988939"},{"product_id":"do88-charge-pipe-kit-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Charge Pipe Kit for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003e\u003cstrong\u003eTo fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eBoost the performance and durability of your 2021+ BMW G8X M2\/M3\/M4 with the do88 Charge Pipe. This system is designed to provide superior durability and improved performance, ensuring your vehicle runs at its peak!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe BMW G8X M2\/M3\/M4 models from 2021 onwards are equipped with an S58 engine featuring a Y-shaped plastic charge pipe. This pipe connects both turbos to the throttle body, channelling the boost from the turbos into the intake manifold. However, under high boost conditions, especially in tuned cars, the original plastic charge pipe struggles to handle the increased temperatures and pressure, leading to a risk of cracking and potential engine damage. This is a crucial concern for owners looking to enhance their vehicle’s performance without compromising reliability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo address this issue, do88 has developed a performance charge pipe system specifically for the 2021+ BMW G8X M2\/M3\/M4 models. Our charge pipe system is 15 % less restrictive than the stock version, significantly improving flow and power potential. It replaces the original, fragile plastic with robust cast aluminium Y-pipe which greatly enhancing durability and preventing costly failures. The design features optimised transitions to minimise restrictions and improve airflow. We use CNC-machined turbo and throttle adaptors to guarantee a leak-free operation, and a larger throttle body quick-disconnect to match the throttle’s internal diameter. For added functionality, our charge pipe includes two 1\/8 NPT ports for methanol injection or boost pressure sensors, with plugs provided for those who opt not to use these features. Testing shows our charge pipe achieves a flow of 960 CFM @ 150mbar (2.17psi), offering a significant improvement over the OEM’s 835 CFM, ensuring both enhanced durability and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe do88 charge pipe kit for the 2021+ BMW G8X M2\/M3\/M4 is designed for a direct fit, ensuring a hassle-free installation process. It comes with everything needed, including silicone hoses, mandrel bent charge pipe from the rear turbo and cast aluminium Y-pipe, to replace the stock charge pipe system. This design not only increases heat and pressure tolerance but also seamlessly integrates into the engine bay. Installation instructions are provided to guide you through the process, making it accessible for both professionals and enthusiasts looking to upgrade their BMW’s performance reliably.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSignificantly improves airflow and power potential compared to the stock version!\u003cbr\u003eReplaces original fragile plastic with robust cast aluminium for enhanced durability and to prevent costly failures.\u003cbr\u003eIncreases tolerance to heat and pressure, enhancing the vehicle’s reliability under high-performance conditions.\u003cbr\u003eAchieves a flow of 960 CFM @ 150mbar (2.17psi), significantly outperforming the OEM’s 835 CFM.\u003cbr\u003eCNC machined hose connections and turbo \/ throttle body adaptors.\u003cbr\u003eComes with two 1\/8 NPT ports for methanol injection or boost pressure sensors, plus plugs for unused ports.\u003cbr\u003eComes all parts parts to completely replace the stock charge pipe system.\u003cbr\u003eDesigned for a direct fit, ensuring a hassle-free installation process with all necessary components included.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 13718054844, 13718054843, 13718054842, 13628626176, 13628637896, 13718054840, 13718089754, 13718054841\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: TR-420, TR420\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304525414737,"sku":"DO88TR-420","price":693.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/TR-420_1-600x400.jpg?v=1791989029"},{"product_id":"do88-engine-oil-cooler-kit-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Engine Oil Cooler Kit for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003eTo fit:\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eImprove the performance and durability of your 2021+ BMW G8X M2\/M3\/M4 with the do88 Engine oil cooler, a cooler designed for improved durability and performance during demanding conditions!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe S58 engine in the 2021+ BMW G8X M2\/M3\/M4 models features an engine oil cooler that is mounted horizontally beneath the front central radiators. The original oil cooler have a Tube \u0026amp; Finn core, which can easily get damaged by stone chips or other road debris. Because of its design and location, it’s not rare for the oil cooler to start leaking due to damage from small stones or other road debris. Such oil leaks can critically damage the engine. With our do88 engine oil cooler, we offer a much more durable design and of course at the same improve the cooling performance!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo design our oil cooler accurately, we performed a detailed 3D scan of the oil cooler’s mounting area. This scan gave us a detailed space to design our do88 engine oil cooler in. We replaced the original Tube \u0026amp; Finn core with a more durable Bar \u0026amp; Plate core combined with TIG-welded aluminium tanks.\u003c\/p\u003e\n\u003cp\u003eOur upgraded do88 engine oil cooler helps your M2, M3, or M4 maintaining correct oil temperature both on the track and road. Our design increases the active cooling area (+14%) and core volume by (57%) compared to the original oil cooler. The robust Bar \u0026amp; Plate core will withstand road debris and stone chips much better and improve the cooling performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe do88 Engine oil cooler for the 2021+ BMW G8X M2\/M3\/M4 includes everything needed for and easy installation (see installation instructions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eImproved reliability!\u003cbr\u003eCore volume increased by 57 % and the active cooling area by 14 % compared to the original cooler (OE).\u003cbr\u003eDrop-in fit, eliminating the need for modifications.\u003cbr\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 17118095293, 17215A4DF50\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: OC200, OC-200\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304574665041,"sku":"DO88OC-200","price":642.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/OC-200_1-600x400.jpg?v=1791989105"},{"product_id":"do88-charge-cooler-radiator-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Charge Cooler Radiator for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003e\u003cstrong\u003eTo fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CLS (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eImprove the performance of your 2021+ BMW G8X M2\/M3\/M4 with the do88 Front Intercooler Radiator, a radiator designed for optimal charge air cooling under demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground\u003c\/strong\u003e\u003cbr\u003eThe S58 engine have a water-to-air charge cooler paired with a heat exchanger (water radiator) in the front of the car. This radiator cool the water flowing through the charge air cooler, the water dissipate heat from the charge air before it enters the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChallenges of the S58 Charge Air Cooling System\u003c\/strong\u003e\u003cbr\u003eOwners of tuned S58 engines often encounter the problem of rapid Heat-Soak in the charge air cooling system, especially during track driving. High intake temperatures can cause the ECU to reduce power output, or even put the car into limp mode. The do88 Front Intercooler Radiator helps to keep temperatures down and improve your car's reliability and performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur Solution\u003c\/strong\u003e\u003cbr\u003eThe custom do88 radiator design began with a total overhaul, prioritising durability and performance. By eliminating plastic components in favour of sturdy aluminium for the end tanks, the core, and CNC-machined ports, and ensuring everything is TIG-welded, our cooler provides durability and long-term performance. The introduction of a Quad pass design improves cooling, with the coolant passing through the cooler's core four times for maximum efficiency.\u003c\/p\u003e\n\u003cp\u003eBut do88's goal extends beyond just durability. By increasing the core volume by 39% and the external tube area by 9%, while simultaneously integrating a Quad pass flow for the coolant, the do88 cooler go beyond the original. This results in improved cooling capacity, thereby enhancing your car's performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003cbr\u003eThe do88 cooler is designed to be easily mounted with your BMW's factory components. It comes with custom rock guards to protect against debris. Our cooler fits both cars with automatic or manual transmissions, making it a versatile upgrade for all G8X M2\/M3\/M4 models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e39% larger core than original.\u003cbr\u003e2-row core that is 48mm thick, this provides an increased active cooling area by a whole 9%.\u003cbr\u003eQuadruple-pass flow, this allows the water to pass through the cooler four times instead of two as on the original cooler, ensuring that one maximises the waters contact with the cooling area.\u003cbr\u003eSlightly higher cooling fins compared to original, 5mm instead of 4.4 mm. This ensuring good airflow to the engine radiator despite the increased core thickness.\u003cbr\u003eFull aluminium construction, complete with durable TIG-welded end tanks.\u003cbr\u003eIncreased fluid capacity (1,4 litre more) for optimal heat dissipation.\u003cbr\u003eUpgrade your BMW G8X M2\/M3\/M4 with our do88 radiator and unlock improved cooling efficiency and performance under demanding driving conditions.\u003c\/p\u003e\n\u003cp\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 17118095283\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: WC430, WC-430\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304616477009,"sku":"DO88WC-430","price":646.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/WC-430_2.jpg?v=1791989187"},{"product_id":"do88-carbon-air-intake-induction-kit-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Carbon Air Intake Induction Kit for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003e\u003cstrong\u003eTo fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eDO88 proudly presents the full carbon fibre Intake System for BMW M2 M3 M4 (G80 G82 G87), engineered for high power outputs!\u003c\/p\u003e\n\u003cp\u003eWhen designing a new intake system for a turbocharged engine, three critical factors are vital: filtration, airflow, and thermal management. Our do88 intake system is engineered to optimise these elements, air filtration, enhanced airflow, and keep low inlet temperatures for the turbos. The design of the airboxes including their shape, volume, and the materials used in its construction is precisely crafted to maximise airflow to the engine, and thereby improving performance.\u003c\/p\u003e\n\u003cp\u003eElevated air intake temperatures badly affect engine performance, as turbos must generate boost using hot, less dense air. Therefore, a fully sealed intake system is essential for minimising Intake Air Temperatures (IATs). However, such a system presents a challenge due to its restrictive nature, relying solely on the stock air feeds at the bottom of the air filter boxes for air intake. During development, it became obvious that to remove this restriction, the system required supplementary fresh air feeds. To address this, we introduced additional air supply openings behind the headlights on each side. To ensure enough air volume around the air filters, we’ve engineered large 7.8-inch air boxes, which additionally provide sufficient clearance for CSL strut brace.\u003c\/p\u003e\n\u003cp\u003eAs replacement for the stock plastic intake pipes, we designed large, smooth carbon fibre tubes. These begin with a diameter of 105mm (4.1 inches) at the air filter end and seamlessly taper down to 3.25 inches, matching our custom turbo inlets. Attached to our carbon tubes is our large, custom-designed air filter. This filter features a densely woven cotton gauze, ensuring clean airflow. Designed for durability and efficiency, the filter is washable and reusable, promoting optimal performance and an extended service life.\u003c\/p\u003e\n\u003cp\u003eOur design distinguishing from most aftermarket intake systems, we’ve taken the additional steps by developing custom turbo inlets that replace the OE’s restrictive plastic inlets. The original equipment (OE) inlets feature connection sizes of only 61mm and 72mm. In contrast, our custom aluminium casting turbo inlets has significantly larger 83mm connections. To ensure our system’s versatility and longevity, we’ve implemented an innovative sealing and adaptor sleeve design. Our casting inlets offer a 53.6mm opening towards our compressor housing inlet sleeves, superior the flow diameter of the OE parts. We seal to the flat screw flange surface, rather than the tube insert side. This design enables our turbo inlets to fit both OE and hybrid turbos, such as the Pure S58 STG2+ and TTE940, by including various sleeves that align with the compressor housing’s inner diameter and our turbo inlets, ensuring a seamless fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLarge 105mm (4,1”) custom-designed pre-oiled cotton air filter with densely knitted cotton gauze.\u003cbr\u003eA fully enclosed \/ sealed design, ensuring that only cold air is supplied to keep the IAT´s low.\u003cbr\u003eProduces an enhanced induction sound from the turbocharger and diverter valves, yet not the disturbing noise often caused by an completely open air intake.\u003cbr\u003ePrecision-engineered, optimised design for unrestricted airflow.\u003cbr\u003eOptimised for tuned engines, hybrid turbos and big turbo kits.\u003cbr\u003eIncreases airflow by 24%\u003cbr\u003eReduced pressure drop and strain on factory components compared to OE intake.\u003cbr\u003eImproved throttle and boost response\u003cbr\u003eSmooth design with no sharp or harsh bends or restrictions.\u003cbr\u003eCompatible with most future mods, i.e. turbo upgrades.\u003cbr\u003eUV and heat-resistant high-gloss clear coat for lasting protection.\u003cbr\u003eWashable air filter for optimum performance and long service life. We recommend cleaning the air filter every 20,000 km, please use universal cleaning product designed for cotton air filters. You can for example use BMC Washing fluid with part number “WADET500”.\u003c\/p\u003e\n\u003cp\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 13718095804, 13718097028, 13718095806, 13718097045, 13718095805, 13718095807, 13718095810, 13718095812, 11658090919, 11658091579\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: LF-270, LF270\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304680800593,"sku":"DO88LF-270","price":2028.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/LF-270_1-600x400.jpg?v=1791989289"},{"product_id":"do88-transmission-cooler-kit-for-bmw-m2-m3-m4-s58-g8x","title":"DO88 Transmission Cooler Kit for BMW M2 M3 M4 S58 G8x","description":"\u003cp\u003e\u003cstrong\u003eTo fit:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBMW M2 (G87) – Engine: S58 – Model years: 2023 – 202X\u003cbr\u003eBMW M3 \/ M3 Competition \/ M3 CS (G80) – Engine: S58 – Model years: 2020 – 202X\u003cbr\u003eBMW M4 \/ M4 Competition \/ M4 CSL (G82) – Engine: S58 – Model years: 2020 – 202X\u003c\/p\u003e\n\u003cp\u003eImprove the performance of your 2021+ BMW G8X M2\/M3\/M4 with the do88 Transmission cooler, a cooler designed for optimal transmission temperatures under demanding driving conditions!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBackground\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor the 2021+ BMW G8X M2\/M3\/M4 models, the ZF 8HP automatic gearbox is robust and fast, designed to handle the high-power output of the S58 engine. However, upgrading the engine with additional performance parts and tune can overwhelm the original cooling system especially during track driving. The risks when overheating the transmission is slower gear changes and the possibility of damaging the transmission. To address this temperature challenge, do88 has developed an upgraded transmission cooler to help keeping the temperatures at a correct level and having the transmission operating correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOur solution\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe do88 performance transmission cooler for the 2021+ BMW G8X models significantly improves the cooling efficiency. Our engineers redesigned the transmission cooler’s core, increasing its volume by 71% and the cooling surface area by 50% while maintaining similar oil pressures. We upgraded the tubes with harmonica tubes with internal channels, ensuring optimal cooling efficiency. It also increases the system’s cooling capacity with a 42 % (8,5 dl vs 6 dl) rise in oil volume. The do88 cooler uses a dual-pass design which means the fluid stays in the cooler for longer time, ensuring more heat is dissipated.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eInstalling the much larger do88 Performance Transmission Cooler is hassle-free, requiring no modifications (see installation instructions).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCore volume increased by 71 % and the active cooling area by 50 % compared to the original cooler (OE).\u003cbr\u003eHarmonica tubes ensure optimal oil flow and maximum surface area contact.\u003cbr\u003eOEM-style “Quick Connect” inlet\/outlet connections.\u003cbr\u003eDrop-in fit, eliminating the need for modifications.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease take care of your engine. Choose DO88 every time!\u003c\/p\u003e\n\u003cp\u003eOEM Part Numbers (for reference only): 17118095284\u003c\/p\u003e\n\u003cp\u003eDO88 Ref: OC210, OC-210\u003c\/p\u003e","brand":"DO88","offers":[{"title":"Default Title","offer_id":55304750367057,"sku":"DO88OC-210","price":519.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/oc-210_1.webp?v=1791989355"},{"product_id":"dorch-engineering-flex-fuel-eca-kit-for-bmw-s58-m2-m3-m4-g8x","title":"Dorch Engineering Flex Fuel ECA Kit for BMW S58 M2 M3 M4 G8x","description":"\u003cp\u003eNow that S58 tuning software supports true CAN-based Flex Fuel tuning, we are offering our own plug and play ECA solution! With CAN, there is no longer much of a need for Bluetooth ethanol sensors. A CAN-based ethanol sensor, can not only monitor ethanol content, but it will also directly communicate with the DME for full Flex Fuel operation. With a Flex Fuel tune, the DME will automatically adjust the tune from a high-powered E85 map, all the way to a pump gas map, and everything in between. This all happens on the fly, based on the live CAN-communication with our ethanol sensor. Gone are the days of doing math at the gas pump only to decide which map to flash and how many gallons of ethanol to mix!\u003c\/p\u003e\n\u003cp\u003eZERO cutting and ZERO wire-taps! This kit is fully reversible and truly plug and play. The wiring integrates into the OEM harness and hoses and sensor tuck seamlessly to allow for reinstallation of all OEM sound insulation foam and engine covers. With the ethanol sensor mounting location as close to the injectors as possible, there is virtually zero lag time on the exact ethanol mixture truly entering the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eDon’t be fooled by our extensive and overly detailed, DIY-friendly instruction manual! You can expect this kit to take about 1 hour to install (depending on skill-level).\u003c\/p\u003e\n\u003cp\u003eKIT CONTENTS\u003cbr\u003eZeitronix ECA-CAN Module\u003cbr\u003eCustom PTFE Hose Set\u003cbr\u003eDorch Plug-n-Play ECA Harness\u003cbr\u003eGenuine Continental Ethanol Sensor\u003cbr\u003ePre-cut Firewall Grommet\u003cbr\u003eMounting Accessories\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Dorch Engineering","offers":[{"title":"Default Title","offer_id":55324779872593,"sku":"DEN-FUP-S58-001","price":547.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/s58-eca-product-photo-800x600-2.webp?v=1792067050"},{"product_id":"ebc-redstuff-front-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Redstuff Front Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eLower Dust Ceramic Street Pads\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Redstuff is a high-performance premium street use pad grade which reduces dust by 40-50%.\u003c\/p\u003e\n\u003cp\u003eMade with a low-dust ceramic-based compound with zero steel fibre, they produce minimal dust that can be easily cleaned with water. They also reduce disc wear, helping both pads and discs last longer.\u003cbr\u003e\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326034428241,"sku":"DP32454C","price":348.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_b221fc6c-0580-471e-b3a3-ef4f90b76cf1.webp?v=1792074497"},{"product_id":"ebc-yellowstuff-front-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Yellowstuff Front Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003ePerformance without compromise\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Yellowstuff is a high-performance brake pad designed for fast road use and high-horsepower vehicles where maximum stopping power is required.\u003cbr\u003eIt performs extremely well from cold and delivers strong, high-friction braking from the first press of the pedal.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326034559313,"sku":"DP42454R","price":358.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_74cc92cc-4cea-4bd4-8558-b0baaafc6928.webp?v=1792074530"},{"product_id":"ebc-bluestuff-front-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Bluestuff Front Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eFaster bed-in. Stronger bite. Track-ready control.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Bluestuff is a high-performance fast road and entry-level trackday brake pad designed for powerful street braking and occasional track use.\u003c\/p\u003e\n\u003cp\u003eThis is the EBC premium high end pad, low dust, pre scorched in our factory - the most inspiring, smooth brake pad you can buy.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326034657617,"sku":"DP52454NDX","price":417.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_24dcb77d-c4e7-4f1b-859a-d93ca0c4bd5f.webp?v=1792074561"},{"product_id":"ebc-rp1-front-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC RP1 Front Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eTrack-ready precision with unprecedented modulation.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes Racing RP-1™ delivers an ultra-stable 0.45 friction coefficient and superb thermal control up to 750°C (1400°F)—engineered perfectly for over-servoed vehicles and Big Brake Kits that demand a smooth, highly controllable pedal feel without the aggressive, snatchy bite of standard race pads.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326034788689,"sku":"DP82454RP1","price":368.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_69fae5b4-ce1d-4914-a45f-f30311b5e73b.png?v=1792074587"},{"product_id":"ebc-rpx-front-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC RPX Front Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eAggressive initial bite and ultra-high race performance.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes Racing RP-X™ delivers an exceptional 0.55 friction coefficient with 100% cold brake response from ambient up to 750°C (1400°F) - engineered perfectly for sprint racing, hill climbs, and circuit drivers who demand an immediate, powerful pedal bite without needing to warm up the pads.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326035116369,"sku":"DP82454RPX","price":381.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_297f5cf0-c063-4131-9412-183bb078a35f.png?v=1792074603"},{"product_id":"ebc-redstuff-rear-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Redstuff Rear Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eLower Dust Ceramic Street Pads\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Redstuff is a high-performance premium street use pad grade which reduces dust by 40-50%.\u003c\/p\u003e\n\u003cp\u003eMade with a low-dust ceramic-based compound with zero steel fibre, they produce minimal dust that can be easily cleaned with water. They also reduce disc wear, helping both pads and discs last longer.\u003cbr\u003e\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326115201361,"sku":"DP32089C","price":86.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_3e3544d2-430e-457f-a282-959189c3087c.webp?v=1792074705"},{"product_id":"ebc-yellowstuff-rear-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Yellowstuff Rear Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003ePerformance without compromise\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Yellowstuff is a high-performance brake pad designed for fast road use and high-horsepower vehicles where maximum stopping power is required.\u003cbr\u003eIt performs extremely well from cold and delivers strong, high-friction braking from the first press of the pedal.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326115529041,"sku":"DP42089R","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_cffc0012-93cf-4453-9aa0-f61fc3c823fb.webp?v=1792074723"},{"product_id":"ebc-bluestuff-rear-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC Bluestuff Rear Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eFaster bed-in. Stronger bite. Track-ready control.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes® Bluestuff is a high-performance fast road and entry-level trackday brake pad designed for powerful street braking and occasional track use.\u003c\/p\u003e\n\u003cp\u003eThis is the EBC premium high end pad, low dust, pre scorched in our factory - the most inspiring, smooth brake pad you can buy.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326115791185,"sku":"DP52089NDX","price":109.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_1adb9603-09f0-40d1-93f7-ac5ea1da3c40.webp?v=1792074741"},{"product_id":"ebc-rp1-rear-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC RP1 Rear Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eTrack-ready precision with unprecedented modulation.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes Racing RP-1™ delivers an ultra-stable 0.45 friction coefficient and superb thermal control up to 750°C (1400°F)—engineered perfectly for over-servoed vehicles and Big Brake Kits that demand a smooth, highly controllable pedal feel without the aggressive, snatchy bite of standard race pads.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326116217169,"sku":"DP82089RP1","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_fed94064-b9ed-4c5e-86b6-a33bba4ef065.webp?v=1792074755"},{"product_id":"ebc-rpx-rear-brake-pads-for-bmw-m2-m3-m4-g8x","title":"EBC RPX Rear Brake Pads for BMW M2 M3 M4 G8x","description":"\u003cp\u003eAggressive initial bite and ultra-high race performance.\u003c\/p\u003e\n\u003cp\u003eEBC Brakes Racing RP-X™ delivers an exceptional 0.55 friction coefficient with 100% cold brake response from ambient up to 750°C (1400°F) - engineered perfectly for sprint racing, hill climbs, and circuit drivers who demand an immediate, powerful pedal bite without needing to warm up the pads.\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326116675921,"sku":"DP82089RPX","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_fb920b53-008c-4925-a801-0dd476e53943.webp?v=1792074771"},{"product_id":"ebc-2-piece-380mm-front-brake-discs-for-bmw-m2-m3-m4-g8x","title":"EBC 2-Piece 380mm Front Brake Discs for BMW M2 M3 M4 G8x","description":"\u003cp\u003eCraftsmanship meets premium metallurgy in our highest-performing rotor to date.\u003c\/p\u003e\n\u003cp\u003eThe EBC Brakes Racing 2-Piece Fully Floating Rotor is a genuine, track-proven upgrade engineered for both high-performance road and race vehicles. Unlike basic 'bolt-up' two-piece units, this authentic fully floating system features innovative stainless steel SD-Drive™ bobbins and handed 48-curved vanes to eliminate thermal distortion, slash operating temperatures, and deliver relentless stopping power under the harshest braking conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Feature Benefits\u003c\/strong\u003e\u003cbr\u003eFully floating 2-piece rotor allows outer ring to expand freely in response to heat, reducing stress, extending rotor life and reducing rotor cracking during extreme use.\u003cbr\u003eRace-grade G3500 high-carbon, high-copper alloy provides exceptional heat management and durability.\u003cbr\u003eDirectional 48-curved vane design maximises cooling efficiency and promotes even brake temperatures.\u003cbr\u003eLightweight construction contributes to improved handling and reduced unsprung mass.\u003cbr\u003eStainless steel SD-Drive™ bobbins resist corrosion and ensure consistent floating operation.\u003cbr\u003eAnti-rattle spring clips eliminate unwanted noise while maintaining smooth rotor performance.\u003cbr\u003e\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326168645969,"sku":"SG2F022","price":1117.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_c9bb051c-0ae3-4c4f-8b3f-475f330f3346.webp?v=1792074157"},{"product_id":"ebc-2-piece-370mm-rear-brake-discs-for-bmw-m2-m3-m4-g8x","title":"EBC 2-Piece 370mm Rear Brake Discs for BMW M2 M3 M4 G8x","description":"\u003cp\u003eCraftsmanship meets premium metallurgy in our highest-performing rotor to date.\u003c\/p\u003e\n\u003cp\u003eThe EBC Brakes Racing 2-Piece Fully Floating Rotor is a genuine, track-proven upgrade engineered for both high-performance road and race vehicles. Unlike basic 'bolt-up' two-piece units, this authentic fully floating system features innovative stainless steel SD-Drive™ bobbins and handed 48-curved vanes to eliminate thermal distortion, slash operating temperatures, and deliver relentless stopping power under the harshest braking conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Feature Benefits\u003c\/strong\u003e\u003cbr\u003eFully floating 2-piece rotor allows outer ring to expand freely in response to heat, reducing stress, extending rotor life and reducing rotor cracking during extreme use.\u003cbr\u003eRace-grade G3500 high-carbon, high-copper alloy provides exceptional heat management and durability.\u003cbr\u003eDirectional 48-curved vane design maximises cooling efficiency and promotes even brake temperatures.\u003cbr\u003eLightweight construction contributes to improved handling and reduced unsprung mass.\u003cbr\u003eStainless steel SD-Drive™ bobbins resist corrosion and ensure consistent floating operation.\u003cbr\u003eAnti-rattle spring clips eliminate unwanted noise while maintaining smooth rotor performance.\u003cbr\u003e\u003c\/p\u003e","brand":"EBC","offers":[{"title":"Default Title","offer_id":55326172676433,"sku":"SG2F026","price":1065.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/image_c9bb051c-0ae3-4c4f-8b3f-475f330f3346.webp?v=1792074157"},{"product_id":"eibach-sportlineplus-adjustable-lowering-springs-for-bmw-m2-m3-m4-g8x","title":"Eibach SportlinePLUS Adjustable Lowering Springs for BMW M2 M3 M4 G8x","description":"\u003cp\u003e\u003cstrong\u003eLISTING IMAGE IS GENERIC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowering:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eM2 G87\u003cbr\u003eFront 25-40mm \/ Rear 20-35mm\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eM3 G80 RWD \u0026amp; xDrive\u003cbr\u003eFront 15-30mm \/ Rear 10-20mm\u003cbr\u003e\u003cbr\u003eM4 G82 RWD\u003cbr\u003eFront 15-30mm \/ Rear 15-30mm\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eM4 G82 xDrive\u003cbr\u003eFront 15-30mm \/ Rear 15-25mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur SportlinePLUS Coil Springs with integrated height adjustment are the perfect solution for those who seek maximum freedom and individual customization when lowering their vehicle. The vehicle height can be adjusted steplessly and precisely at both the front and rear axles. Depending on the model, the system allows for a lowering of up to 50 mm with an adjustment range of 15 mm, so that wheel loads can be optimally set.\u003c\/p\u003e\n\u003cp\u003eTo make installation as easy as possible, the SportlinePLUS springs are compatible with all factory shock absorbers—whether they are hydraulically or electronically controlled. This provides maximum flexibility and easy retrofitting for a wide range of vehicle models.\u003c\/p\u003e\n\u003cp\u003eA standout feature is the innovative design of the spring ends on the rear axle, which effectively reduces contact corrosion and significantly extends the lifespan of the components. This is further complemented by the proven Eibach polymer coating, offering reliable protection against weather conditions and wear.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55335154090321,"sku":"E25-20-057-03-22","price":897.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/56CD2E82A1C868F7889A56D01455F648C06113905729868E2B320304FAFF05EB.jpg?v=1792143230"},{"product_id":"eibach-pro-kit-lowering-springs-for-bmw-m3-g80","title":"Eibach Pro-Kit Lowering Springs for BMW M3 G80","description":"\u003cp\u003e\u003cstrong\u003eLISTING IMAGE IS GENERIC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowering:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eFront 20mm \/ Rear 5-10mm\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Eibach PRO-KIT is a premium line of lowering springs designed to enhance the performance and appearance of your vehicle. Whether you're a car enthusiast looking to improve the handling of your daily driver or motorsports competitor looking for an edge on the track. the Eibach PRO-KIT has you covered.\u003c\/p\u003e\n\u003cp\u003eImproved handling and stability, especially when cornering\u003cbr\u003eA lower centre of gravity which results in better vehicle control\u003cbr\u003eA more aggressive stance which gives your vehicle a sportier look\u003cbr\u003eIncreased tire-to-road contact for better traction\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePRO-KIT vs. SPORTLINE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Eibach PRO-KIT and SPORTLINE kit are designed to improve the handling and performance of a vehicle, but they are intended for different uses. The PRO-KIT is intended for daily driving and mild track use, providing a moderate improvement in performance while still maintaining a comfortable ride. On the other hand, the SPORTLINE kit is intended for performance driving and track use, providing a significant improvement in performance with a firmer, more aggressive ride. It's also noticed that SPORTLINE kit lower the vehicle more than PRO-KIT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55335605698897,"sku":"E10-20-049-06-22","price":415.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/eib_eibach_pro-kit_lowering_springs_966.webp?v=1792142458"},{"product_id":"eibach-pro-kit-front-lowering-springs-for-bmw-m3-g80-g81","title":"Eibach Pro-Kit Front Lowering Springs for BMW M3 G80 G81","description":"\u003cp\u003e\u003cstrong\u003eLISTING IMAGE IS GENERIC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowering:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eG80\u003cbr\u003eFront 20mm\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eG81\u003cbr\u003eFront 25mm\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Eibach PRO-KIT is a premium line of lowering springs designed to enhance the performance and appearance of your vehicle. Whether you're a car enthusiast looking to improve the handling of your daily driver or motorsports competitor looking for an edge on the track. the Eibach PRO-KIT has you covered.\u003c\/p\u003e\n\u003cp\u003eImproved handling and stability, especially when cornering\u003cbr\u003eA lower centre of gravity which results in better vehicle control\u003cbr\u003eA more aggressive stance which gives your vehicle a sportier look\u003cbr\u003eIncreased tire-to-road contact for better traction\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePRO-KIT vs. SPORTLINE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Eibach PRO-KIT and SPORTLINE kit are designed to improve the handling and performance of a vehicle, but they are intended for different uses. The PRO-KIT is intended for daily driving and mild track use, providing a moderate improvement in performance while still maintaining a comfortable ride. On the other hand, the SPORTLINE kit is intended for performance driving and track use, providing a significant improvement in performance with a firmer, more aggressive ride. It's also noticed that SPORTLINE kit lower the vehicle more than PRO-KIT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55335608549713,"sku":"E10-20-049-01-20","price":218.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/881D8DD1D2F107FB20A0EAF19C648C062B7EF62FD2AD322636BDA3B78E01E485.jpg?v=1792144401"},{"product_id":"eibach-pro-kit-lowering-springs-for-bmw-m3-g81","title":"Eibach Pro-Kit Lowering Springs for BMW M3 G81","description":"\u003cp\u003e\u003cstrong\u003eLISTING IMAGE IS GENERIC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowering:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eFront 25mm \/ Rear 5mm\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Eibach PRO-KIT is a premium line of lowering springs designed to enhance the performance and appearance of your vehicle. Whether you're a car enthusiast looking to improve the handling of your daily driver or motorsports competitor looking for an edge on the track. the Eibach PRO-KIT has you covered.\u003c\/p\u003e\n\u003cp\u003eImproved handling and stability, especially when cornering\u003cbr\u003eA lower centre of gravity which results in better vehicle control\u003cbr\u003eA more aggressive stance which gives your vehicle a sportier look\u003cbr\u003eIncreased tire-to-road contact for better traction\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePRO-KIT vs. SPORTLINE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBoth the Eibach PRO-KIT and SPORTLINE kit are designed to improve the handling and performance of a vehicle, but they are intended for different uses. The PRO-KIT is intended for daily driving and mild track use, providing a moderate improvement in performance while still maintaining a comfortable ride. On the other hand, the SPORTLINE kit is intended for performance driving and track use, providing a significant improvement in performance with a firmer, more aggressive ride. It's also noticed that SPORTLINE kit lower the vehicle more than PRO-KIT.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55336371618129,"sku":"E10-20-049-08-22","price":438.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/eib_eibach_pro-kit_lowering_springs_966.webp?v=1792142458"},{"product_id":"eibach-sportlineplus-adjustable-lowering-springs-for-bmw-m3-g81","title":"Eibach SportlinePLUS Adjustable Lowering Springs for BMW M3 G81","description":"\u003cp\u003e\u003cstrong\u003eLISTING IMAGE IS GENERIC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLowering:\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eFront 20-35mm \/ Rear 5-20mm\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur SportlinePLUS Coil Springs with integrated height adjustment are the perfect solution for those who seek maximum freedom and individual customization when lowering their vehicle. The vehicle height can be adjusted steplessly and precisely at both the front and rear axles. Depending on the model, the system allows for a lowering of up to 50 mm with an adjustment range of 15 mm, so that wheel loads can be optimally set.\u003c\/p\u003e\n\u003cp\u003eTo make installation as easy as possible, the SportlinePLUS springs are compatible with all factory shock absorbers—whether they are hydraulically or electronically controlled. This provides maximum flexibility and easy retrofitting for a wide range of vehicle models.\u003c\/p\u003e\n\u003cp\u003eA standout feature is the innovative design of the spring ends on the rear axle, which effectively reduces contact corrosion and significantly extends the lifespan of the components. This is further complemented by the proven Eibach polymer coating, offering reliable protection against weather conditions and wear.\u003c\/p\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":55336398913873,"sku":"E25-20-057-04-22","price":870.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/56CD2E82A1C868F7889A56D01455F648C06113905729868E2B320304FAFF05EB.jpg?v=1792143230"},{"product_id":"eventuri-carbon-intake-kit-for-bmw-m2-m3-m4-g8x","title":"Eventuri Carbon Intake Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003ePerformance Gain: 13-18hp, 12-16ft-lb (Stock Tune)\u003cbr\u003eTurbo Inlet Area Increased up to 160%\u003cbr\u003eFiltration Area Increased up to 40%\u003c\/p\u003e\n\u003cp\u003e*Some images show our optional carbon engine cover and carbon strut brace.\u003c\/p\u003e\n\u003cp\u003ePresenting an intake which truly sets a benchmark for the BMW G8X M3\/M4 platform. We have carried out intensive R\u0026amp;D to develop an intake which not only improves on the stock M3\/M4 but also is future proof in its capacity to cater for high powered builds well in excess of 1000hp. Our system is a complete redesign from the airboxes to the turbo inlets with the aim of reducing pressure loss while increasing the flow rate and keeping inlet temperatures low. We have maximised the usage of the available space to employ 2 custom made filters with a 40% larger filtration area than stock. These are used in our Patented Venturi housings to smoothly funnel the air to the turbo inlets. The inlets themselves are up to 160% larger in cross sectional area than stock and are designed with an advanced dimpled inner surface to reduce frictional losses between the flow and the wall boundary. By allowing a “cushion” of air at the wall surface, airflow is able to move through the inlets at higher flow rates with reduced pressure loss. This allows the turbos to draw air with less resistance and therefore reduce the wastegate duty cycle resulting in higher overall performance.\u003c\/p\u003e\n\u003cp\u003eThe Eventuri Difference\u003c\/p\u003e\n\u003cp\u003eThe G8X M3\/M4 Eventuri system uses our Patented Carbon Fiber Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":55339242029393,"sku":null,"price":2784.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":55339242062161,"sku":null,"price":2784.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/51950665778_f5bfdf8332_o-scaled.webp?v=1792158752"},{"product_id":"eventuri-carbon-engine-cover-for-bmw-m2-m3-m4-g8x-s58","title":"Eventuri Carbon Engine Cover for BMW M2 M3 M4 G8x S58","description":"\u003cp\u003eThe BMW M3\/M4 is one of the flagship vehicles from the Munich stables and so deserves to have an engine bay that looks as good as it performs. With the OEM cover leaving the engine bay looking unfinished, we redesigned it to bring much needed symmetry and give the engine a more complete aesthetic. Our cover extends across the charge-cooler while still allowing for sufficient heat dissipation with added venting. Crafted from prepreg carbon fiber, our engine cover is a direct replacement using the OEM mounts.\u003c\/p\u003e\n\u003cp\u003eThe photos also show our intake system available separately.\u003c\/p\u003e","brand":"Eventuri","offers":[{"title":"Gloss","offer_id":55353216631121,"sku":"EVE-G8XM-CF-ENG","price":984.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":55353216663889,"sku":"EVE-G8XM-CFM-ENG","price":984.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/G80-engine-cover-1.webp?v=1792263960"},{"product_id":"goodridge-braided-brake-line-kit-for-bmw-m2-m3-m4-g8x","title":"Goodridge Braided Brake Line Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003e\u003cstrong\u003ePlease leave a note at checkout with your colour choise:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBlack\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCarbon\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClear\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eClear with Goodridge logo\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eElectric Blue\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eRed\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eVintage Matte Black\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSuperior to OEM rubber brake lines, Goodridge Premium Performance brake lines feature a PTFE inner core wrapped in a stainless steel braided outer, ensuring the line doesn’t expand under pressure, to maximise effort exerted at the brake pedal directly to the calliper.\u003c\/p\u003e\n\u003cp\u003eGoodridge Premium Performance brake lines have been developed on the track, at the highest level, for use on the road providing the following features \u0026amp; benefits for everyday driving.\u003c\/p\u003e\n\u003cp\u003eNO EXPANSION, ELIMINATING SPONGEY FEEL\u003cbr\u003eGREATER BRAKING EFFICIENCY\u003cbr\u003eSUPERIOR RESISTANCE TO ABRASION AND CORROSION\u003cbr\u003eAll Goodridge Premium Performance brake line kits are 100% pressure tested and are supplied with copper crush washers where necessary.\u003c\/p\u003e\n\u003cp\u003eAll kits are built to order at our Exeter head office.\u003c\/p\u003e\n\u003cp\u003eOur standard production, and pressure test, times are 7-10 working days (this may vary during busy periods).\u003c\/p\u003e","brand":"Goodridge","offers":[{"title":"Default Title","offer_id":55367326040401,"sku":"SBW0271-4C","price":164.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/4W_4_line_BLACK_SS_7d2da134-763a-4b23-a1fb-180ae6e484cf.webp?v=1792410437"},{"product_id":"infinity-design-carbon-air-intake-induction-kit-for-bmw-m2-m3-m4-g8x","title":"Infinity Design Carbon Air Intake Induction Kit for BMW M2 M3 M4 G8x","description":"\u003cp\u003e\u003cstrong\u003eDesign\u003c\/strong\u003e\u003cbr\u003eFor the G Series M2, M3 and M4 we have taken full advantage of improving the intake system by not just re designing and replacing the intake but also larger turbo inlets.\u003c\/p\u003e\n\u003cp\u003eIn addition to this we have created 3 Cold Air Feeds per side as opposed to the single frontal air feed of the OEM system.\u003c\/p\u003e\n\u003cp\u003eThe first feed comes from the frontal factory air inlet.  The second is a frontal air feed which are located in a region where we tested only ambient air reaches.  The third and final feeds are the most interesting. \u003c\/p\u003e\n\u003cp\u003eThis design strategy ensures the maximum amount of air at the lowest possible intake temperature. The final result is a stunning under bonnet appearance matched with a more eager and smoother throttle response.  More torque available faster and an intake sound which is sophisticated and pronounced under load.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCFD Analysis\u003c\/strong\u003e\u003cbr\u003eAs with all of our designs we use computational fluid dynamics analysis (CFD Analysis).\u003cbr\u003eThe results show a smooth non turbulent air flow with the filter which straights out the air and allows the venturi inlet tube to draw in large amounts of air at high speed and both act independently and create what is effectively the largest velocity stack of any intake system on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eENLARGED TURBO INLETS\u003c\/strong\u003e\u003cbr\u003eThe flared out turbo inlets are significantly larger than the stock units and are designed to smooth out and increase air speed into the turbo impellers.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTRIPLE AIR FEED\u003cbr\u003eWe have spent a significant amount of time designing our air ducts and optimising them beyond the norm by having three cold air feeds. \u003c\/p\u003e\n\u003cp\u003eThe result is a system which matches the factory intake system for inlet temperatures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Flow Air Filters \u0026amp; Intake Temperatures\u003c\/strong\u003e\u003cbr\u003eOur bespoke short stack high surface area filter larger than any cone filter design currently on offer on the market with a huge opening of 170mm (6 3\/4\") and is designed to take full advantage of the intake tubes by altering the direction of the airflow towards the outer walls.  By placing the air filters in front of the inlet tube we achieve the largest velocity stack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePERFORMANCE TESTING\u003c\/strong\u003e\u003cbr\u003eDyno tests were performed under strict controlled conditions on an independent Dyno Dynamics machine in order to show a true and realistic result.\u003c\/p\u003e\n\u003cp\u003eA healthy and genuine increase of  12-16hp | 10-15 lb.ft from 5500-7000rpm with a much faster turbo spool up time at lower rpm with a small increase in midrange power from 4200-5000rpm.The results shown are the highest stock result (run 7) vs the first run immediately after fitting the intake (run 8).\u003c\/p\u003e","brand":"Infinity Design","offers":[{"title":"Gloss","offer_id":55367846297937,"sku":"INF-G8X-I-G","price":2220.0,"currency_code":"GBP","in_stock":true},{"title":"Matte","offer_id":55367846330705,"sku":"INF-G8X-I-M","price":2220.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1089\/1952\/1617\/files\/G8xfullkitexpanded.webp?v=1792418631"}],"url":"https:\/\/wgmotorworks.co.uk\/collections\/m3-m4-g8x.oembed","provider":"WG Motorworks","version":"1.0","type":"link"}